LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2010 >> Charger SRT-8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 374 (Electronic Control Modules (Service Information)) >> MODULE, Powertrain Control >> Removal >> Removal >> Right Hand Drive

Right Hand Drive

WARNING: This page is about a different car, the 2010 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PCM, Mounting Screws & Electrical Connectors
GC0138955Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Disconnect the PCM electrical connectors (2).
  3. Remove the PCM mounting screws (3).
  4. Remove the PCM (1) from vehicle.
scientia non olet · About LEMON Manuals