LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2010 >> Challenger SRT-8, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 5.7L

HEATER, Engine Block: Installation: 5.7L

Fig 1: BLOCK HEATER 5.7L
GC0091808Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
  1. Thoroughly clean the cylinder block core hole and the block heater seat.
  2. Insert the block heater assembly (1) into the block.
  3. With the block heater fully seated, tighten bolt (1) to 2 N.m (17 in. lbs.).
scientia non olet · About LEMON Manuals