LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2010 >> Caliber Heat, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> COIL, Ignition >> Installation >> Installation

COIL, Ignition: Installation: Installation

Fig 1: Removing/Installing Ignition Coil
GC0082371Courtesy of CHRYSLER LLC
  1. Install ignition coil.
    Fig 2: IGNITION COIL BOLT
    GC0082370Courtesy of CHRYSLER LLC
  2. Tighten bolt to 9 N.m (79.5 in. lbs.).
  3. Connect electrical connectors and lock.
  4. Install the negative battery cable.
scientia non olet · About LEMON Manuals