Gas Engine

NOTE: Before proceeding. See Steering - Warning .

Siphon as much fluid as possible from the power steering fluid reservoir.
Remove the engine appearance cover.

Fig 1: Pressure Hose
Courtesy of CHRYSLER LLC
If equipped with a non-turbo engine:
1. Remove the pressure hose routing bracket bolt (2) at the upper mount (8).
2. Remove the pressure hose (3) at the pump pressure port (5).
Fig 2: Pressure Hose At Pump - 2.4L Turbo
Courtesy of CHRYSLER LLC
If equipped with a turbo engine, remove the pressure Hose (3) at the pump (2) pressure port.

Fig 3: Supply Hose
Courtesy of CHRYSLER LLC
Remove the hose clamp (2) securing the supply hose (1) at the pump.
Remove the supply hose (1) from the pump (3).

Fig 4: Power Steering Pump - Gas
Courtesy of CHRYSLER LLC
Remove the drive belt (2). Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal
Remove the three pump mounting bolts (1) through the pulley (3) openings.
Remove the power steering pump.