LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2010 >> Caliber Express >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> SOLENOID, Variable Valve Timing >> Installation >> Rear Solenoid 1/2

Rear Solenoid 1/2

Fig 1: Rear Variable Valve Timing Solenoid
GC0082441Courtesy of CHRYSLER LLC
  1. Rear variable valve timing solenoid. Note mounting tab location is different between front and rear solenoids.
  2. Install solenoid into cylinder head.
  3. Install mounting bolt and tighten to 12 N.m (9 ft. lbs.).
  4. Connect electrical connector to Variable valve timing solenoid.
    Fig 2: Identifying Rear Variable Valve Timing Solenoid
    GC0082440Courtesy of CHRYSLER LLC
  5. Connect negative battery cable.
  6. Install engine cover.
scientia non olet · About LEMON Manuals