Glow Plugs

Fig 1: Identifying Glow Plugs

Courtesy of CHRYSLER LLC

Install glow plugs (1). Tighten glow plugs to 11 N.m (97 in. lbs.).

Fig 2: Identifying Glow Plug Harness Connectors
Courtesy of CHRYSLER LLC
Connect glow plug harness connector (1).

Fig 3: Identifying Lock Tabs & Engine Wire Harness
Courtesy of CHRYSLER LLC
Connect the glow plug four way harness connector.
Position the wire harness (2) and push down to lock tabs (1).

Fig 4: Identifying Fuel Rail Pressure Regulator Harness Connector
Courtesy of CHRYSLER LLC
Connect the fuel rail pressure sensor harness connector (2).

Fig 5: Identifying Quarter Turn Lock Tabs & Air Inlet Duct
Courtesy of CHRYSLER LLC
Install engine cover.
Connect negative battery cable.
Install air inlet duct (2) and lock the quarter turn lock tabs (1).