MODULE, Steering Column Control: Removal: Removal: Disassembly

NOTE: There is no need to disassemble the Steering Column Control Module (SCCM) if only removing the SCCM from the column.

Fig 1: LEFT STALK RET. SC.

Courtesy of CHRYSLER LLC

1. Remove the left multi-function switch stalk retaining screw (2).
2. Pull the left stalk out of the SCCM.
   Fig 2: LEFT STALK ELECT. CONN.

   Courtesy of CHRYSLER LLC
3. Disconnect the left stalk electrical connector.
4. Separate the left switch from the SCCM.
   Fig 3: RIGHT STALK RET. SC.

   Courtesy of CHRYSLER LLC
5. Remove the one right multi-function switch retaining screw.
6. Pull right switch out of SCCM.
   Fig 4: RIGHT STALK ELECT. CONN.

   Courtesy of CHRYSLER LLC
7. Disconnect the right switch electrical connector.