0675-Cylinder 5 Glow Plug Open Circuit: Notes
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
With the ignition on and the Glow Plug Module Glow Plug command on.
- Set Condition:
The Cylinder 5 Glow Plug circuit is open or shorted for 0.5 seconds.
| Possible Causes |
|---|
| INTERMITTENT DTC |
| GLOW PLUG CONTROL CIRCUIT(S) OPEN |
| GLOW PLUG CONTROL CIRCUIT(S) SHORTED TO GROUND |
| GLOW PLUG CONTROL CIRCUIT(S) SHORTED TO VOLTAGE |
| GLOW PLUG |
| GLOW PLUG MODULE |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Engine Control (ECM) - Standard Procedure