Power Windows
- Disconnect and isolate the battery negative cable.
- Remove the power window switch to be tested. See Electrical - Power Systems/Power Windows/SWITCH, Power Window - Removal .
- Using an ohmmeter, test switch per the table below.
- If test results are not obtained as shown in the test table, replace the switch.
POWER WINDOW SWITCH RESISTANCE TEST
| - | PIN TO PIN | DOWN | AUTO DOWN | UP | AUTO UP |
| RIGHT VENT WINDOW | 1 - 7 | 900 Ohms | 1.5 Ohms | 335 Ohms | N/A |
| LEFT VENT WINDOW | 3 - 7 | 900 Ohms | 1.5 Ohms | 335 Ohms | N/A |
| PASSENGER WINDOW | 5 - 7 | 900 Ohms | 1.5 Ohms | 335 Ohms | N/A |
| DRIVER WINDOW | 6 - 7 | 900 Ohms | 1.5 Ohms | 335 Ohms | 117 Ohms |