DTC 9003: Driver Entry/Exit Lamp Control Circuit Low: Notes

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

When Monitored:
Whenever the module is awake.
Set Condition:
When the DDM senses an excessive current draw on the Driver Entry/Exit Lamp Driver circuit, this code will set.

Possible Causes
DRIVER ENTRY/EXIT LAMP DRIVER CIRCUIT SHORT TO GROUND
DRIVER ENTRY/EXIT LAMP DRIVER CIRCUIT SHORT TO THE DRIVER ENTRY/EXIT LAMP GROUND CIRCUIT
DRIVER ENTRY/EXIT LAMP
DRIVER DOOR MODULE (DDM)