9033-Seat Belt Buckle Center Switch Circuit Open: Notes

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

• When Monitored: 

  While the ignition on and the Occupant Classification Controller (ORC) configured for a Seat Belt Buckle Center Switch, the Occupant Restraint Controller (ORC) module checks the switch input current ranges.

• Set Condition: 

  The DTC will be set active if the ORC detects an open or high resistance on the seat belt buckle center switch circuits.

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure  .