9015-Drivers Seat Belt Sense Plausibility Error: Notes

Courtesy of CHRYSLER LLC

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

• When Monitored: 

  With the ignition on.

• Set Condition: 

  This DTC will set if the module detects a connection failure at the Driver Seat Belt Switch or Occupant Restraint Controller (ORC) connectors terminals related to the Driver Seat Belt Switch. This code may occur in combination with other active DTCs.

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure  .