Specifications Index
SPRINTER SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM | ||
| Torque | FASTENER TORQUE | ||
| Battery | N/A | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | N/A | ||
| Without ABS | STANDARD PROCEDURE | ||
| Disc Brakes | SPECIFICATIONS | ||
| Torque | SPECIFICATIONS | ||
| Charging | |||
| Generator | N/A | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | N/A | ||
| Belt Routing | |||
| 3.0L Diesel | REMOVAL | ||
| Engine Cooling | |||
| General Service Specifications | SPECIFICATIONS | ||
| Radiator Cap Pressure | 18-21 psi | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | PUMP, WATER | ||
| Engine Mechanical | |||
| 3.0L Diesel | |||
| Compression | N/A | ||
| Oil Pressure | 16 psi at idle; 52 psi at 3200 RPM | ||
| Overhaul | 3.0L TURBO DIESEL - SERVICE INFORMATION | ||
| Torque | TORQUE | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Drive Plate/Flex Plate Torque | |||
| 3.0L Diesel | 33 Ft. Lbs. (45 N.m) Plus 90 degrees | ||
| Fuel System | |||
| Fuel Filter Location | |||
| 3.0L Diesel | FILTER, FUEL | ||
| Pressure Specification | |||
| 3.0L Diesel | 59 psi +/- 2 psi (in-tank pump) | ||
| Fuel Pressure Test Procedure | |||
| 3.0L Diesel | N/A | ||
| Fuel Pressure Release Procedure | |||
| 3.0L Diesel | N/A | ||
| Ignition | |||
| Firing Order | |||
| 3.0L Diesel | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Starting | |||
| Starter | N/A | ||
| Torque | TORQUE - STARTER - 3.0L DIESEL ENGINE | ||
| Wheel Alignment | |||
| Adjustment Specifications & Torque | WHEEL ALIGNMENT, CURB HEIGHT, AND TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Lug Nut Torque | |||
| Aluminum Wheels | 133 Ft. Lbs. (180 N.m)TORQUE | ||
| Steel Wheels | 177 Ft. Lbs. (240 N.m) | ||