LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Battery System) >> Battery System >> Cables-Battery >> Installation >> Battery Cable

Battery Cable

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery cable in the vehicle.
  2. One at a time, install the battery cable retaining push-pins, fasteners and routing clips until the cable is installed exactly in the factory installed location in the vehicle. Refer to SYSTEM WIRING DIAGRAMS .
  3. Connect the battery negative cable terminal.
scientia non olet · About LEMON Manuals