2271-Alternator Load Signal Excessive Current: Notes
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
Continuously while the system is active.
- Set Condition:
The ECM is receiving a LIN bus error message.
| Possible Causes |
|---|
| INTERMITTENT DTC |
| LIN BUS CIRCUIT SHORTED TO GROUND |
| LIN BUS CIRCUIT SHORTED TO VOLTAGE |
| GLOW PLUG MODULE |
| GENERATOR |
| ENGINE CONTROL MODULE (ECM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Engine Control (ECM) - Standard Procedure