LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Nitro SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> RELAY, Glow Plug >> Removal >> Removal

RELAY, Glow Plug: Removal: Removal

Fig 1: GLOW PLUG RELAY
GC0085960Courtesy of CHRYSLER LLC
NOTE: The glow plug relay (module) (1) is located in the engine compartment. It is attached to the ECM mounting bracket (2).
  1. Remove pin (4).
  2. Disconnect electrical connector (3) and remove relay.
scientia non olet · About LEMON Manuals