INJECTOR(S), Fuel: Installation: Installation

Fig 1: Injector Retaining Clip

Courtesy of CHRYSLER LLC

NOTE: If the same fuel injector is to be reinstalled, install new O-rings.

NOTE: Apply a small amount of clean engine oil to each injector O-ring. This will aid in the installation.

1. Install the fuel injector (3) into the fuel rail (4) using a side to side motion while pushing injector into the fuel rail assembly.
2. Using suitable pliers (1), install the fuel injector retaining clip (2).
3. Install the fuel rail assembly. See Fuel System/Fuel Delivery/RAIL, Fuel - Installation 
4. Start engine and check for fuel leaks.