Diagnostic Test

ACTIVE DTC
1. Ignition on, engine not running.
2. With the scan tool, View PCM DTCs.
  Is the DTC Active at this time?
  
  Yes
  - Go to step 2
  No
  - Refer to the INTERMITTENT CONDITION Diagnostic Procedure. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .
U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE ALSO ACTIVE
1. With the scan tool View DTCs.
  Is the U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE also set?
  
  Yes
  - Follow the diagnostics for U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE
  - Perform the POWERTRAIN VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .
  No
  - Replace and program the Powertrain Control Module per Service Information.
  - Perform the POWERTRAIN VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .