LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Charger SXT, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> PLUG, Glow >> Installation >> Installation

PLUG, Glow: Installation: Installation

  1. Install glow plug. Tighten glow plugs to 12 Nm (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover.
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals