LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2009 >> Caliber SRT-4 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> CAPACITOR, Ignition >> Removal >> Removal

CAPACITOR, Ignition: Removal: Removal

Fig 1: Removing/Installing Ignition Capacitor
GC0084713Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Remove electrical connector (1).
  3. Remove mounting bolt (3) and ignition capacitor (2).
scientia non olet · About LEMON Manuals