LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Sprinter 3500, Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor-Engine Coolant Temperature >> Removal >> Engine Coolant Sensor-Removal-3.0L-Diesel

Engine Coolant Sensor-Removal-3.0L-Diesel

  1. Remove engine cover.
  2. Partially drain cooling system. See STANDARD PROCEDURE .
  3. Disconnect electrical connector
  4. Remove clip (1).
  5. Remove engine coolant temperature sensor (2).
    6. Fig 1: Engine Coolant Sensor Location (3.0L)
    GC0044887Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals