LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Sprinter 3500, Van Cargo >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - 3.5L Gas >> O2 Sensor >> Installation >> Sensor-Oxygen

O2 Sensor: Installation: Sensor-Oxygen

  1. After removing the sensor, the exhaust manifold threads must be cleaned. Use a suitable oxygen sensor thread cleaning tap. If reusing the original sensor, coat the sensor threads with an anti-seize compound. New sensors have compound on the threads and do not require an additional coating.
  2. Install sensor using an oxygen sensor crow foot wrench such as Snap-On tool YA8875 or equivalent.
  3. Connect electrical connector to oxygen sensor.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals