LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Nitro SLT, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Heater-Engine Block >> Description

Heater-Engine Block: Description

The block heater is operated by ordinary house current (110 Volt AC) through a power cord and connector located in the engine compartment. The heater is mounted in a core hole (in place of a core hole plug) in the engine block, with the heating element immersed in coolant.

CAUTION: The power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds and become damaged.
scientia non olet · About LEMON Manuals