Diagnostic Test

WARNING: This page is about a different car, the 2009 Dodge Durango and 2009 Chrysler Aspen. However, it is still accessible from the selected car via links, so may be relevant.

DTC PRESENT
1. With the scan tool, record and erase the DTCs.
2. Cycle the ignition switch from On to Off.
3. Wait 30 seconds.
4. Turn the ignition on.
5. With the scan tool, read the DTCs.
  Does the scan tool display POWER LIFTGATE MODULE INTERNAL?
  
  No
  - Operate the power liftgate open and closed several times. With the scan tool, read DTCs. If this code appears, replace the Power Liftgate Module in accordance with service information.
  - Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure .
  Yes
  - Replace the Power Liftgate Module in accordance with the service information.
  - Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure .