LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Durango 3.7 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Electronic Control Modules (Service Information)) >> MODULE, Final Drive Control >> Installation >> Installation

MODULE, Final Drive Control: Installation: Installation

WARNING: This page is about a different car, the 2009 Dodge Durango and 2009 Chrysler Aspen. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the final drive control module in its location on the mounting plate and firmly snap into place.
  2. Connect the electrical connectors.
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals