LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Durango 3.7 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Vehicle Quick Reference) >> Hoisting >> Standard Procedure >> Hoisting And Jacking >> Floor Jacking

Floor Jacking

WARNING: This page is about a different car, the 2009 Dodge Durango and 2009 Chrysler Aspen. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Correct Vehicle Lifting Locations - Typical
GC0103918Courtesy of CHRYSLER LLC
CAUTION: Do not attempt to lift a vehicle with a floor jack positioned under:
  • an axle tube.
  • aluminum differential.
  • a body side sill.
  • a steering linkage component.
  • a drive shaft.
  • the engine or transmission oil pan.
  • the fuel tank.
  • a front suspension arm.

When properly positioned, a floor jack can be used to lift a Durango vehicle. Support the vehicle in the raised position with jack stands at the front and rear ends of the frame rails.