Manifold Absolute Pressure (Map) Sensor-5.7L

Fig 1: MAP Sensor Location - 5.7L

Courtesy of CHRYSLER LLC

The Manifold Absolute Pressure (MAP) sensor (1) is mounted to the front of the intake manifold air plenum box.

Fig 2: Removing/Installing MAP Sensor - 5.7L

Courtesy of CHRYSLER LLC

1. Disconnect electrical connector at sensor by sliding release lock out (1). Press down on lock tab (2) for removal.
2. Rotate sensor 1/4 turn counterclockwise for removal.
3. Check condition of sensor O-ring.