Intake Manifold Air Temperature Sensor-3.7L

Fig 1: View Of IAT Sensor Tab/O-Ring - 3.7L/4.7L/5.7L

Courtesy of CHRYSLER LLC

1 - IAT SENSOR

2 - SENSOR O-RING

3 - RELEASE TAB

1. Check condition of sensor O-ring (2).
   Fig 2: IAT Sensor Location - 3.7L

   Courtesy of CHRYSLER LLC
2. Clean sensor mounting hole in air intake resonator (3).
3. Position sensor (1) into air intake resonator and rotate clockwise until past release tab.
4. Install air intake resonator (3) to throttle body.
5. Install electrical connector to sensor (1).