Control Circuit Testing
WARNING: This page is about a different car, the 2012 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - Refer to Starter Relay The starter relay is located within the Totally Integrated Power Module (TIPM). Refer to FUSE LOCATIONS AND TYPES, SPECIFICATIONS .
- Starter Solenoid - Refer to DIAGNOSIS AND TESTING .
- Ignition Switch - Refer to SWITCH, IGNITION Key Lock Cylinder
- Park/Neutral Position Switch - If equipped with an automatic transmission, refer to Park/Neutral Position Switch in appropriate Transmission.
- Clutch Interlock Switch - Refer to DIAGNOSIS AND TESTING .
- Wire harnesses and connections - Refer to appropriate Wiring Diagrams.