Receiver, Wireless Ignition Node: Installation: Installation

Fig 1: Wireless Ignition Node

Courtesy of CHRYSLER GROUP, LLC

1. Reconnect the electrical connector (1) to the Wireless Ignition Node (WIN) and position the WIN back into the instrument panel.
   Fig 2: Wireless Ignition Node Screws

   Courtesy of CHRYSLER GROUP, LLC
2. Install the four screws (1) through the instrument panel into the WIN.
3. Install the instrument panel trim cover. Ensuring that the cover snaps into the securing clips.
   Fig 3: Lower Instrument Cluster Trim Screws

   Courtesy of CHRYSLER GROUP, LLC
4. Install the two lower instrument panel screws (1).
5. Install the lower steering column cover reinforcement and the steering column trim cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
6. Connect the battery negative cable.
7. Program the WIN following the Module/Programming Order Replacement Guide and Module Programming procedures. Refer to STANDARD PROCEDURE .