LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Caliber SRT-4 >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Column >> Disassembly >> Steering Column >> Ignition Switch

Ignition Switch

Fig 1: Ignition Switch Mounting & Screw
GC0042957Courtesy of CHRYSLER LLC
NOTE: Lock cylinder housing removed from column.
  1. Remove the ignition switch (2) mounting screw (1).
    Fig 2: Ignition Switch Removal/Installation
    GC0042958Courtesy of CHRYSLER LLC
  2. Pull the switch (1) straight out and off the retaining tabs (2) located on the lock cylinder housing.
scientia non olet · About LEMON Manuals