LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Caliber R/T, AWD >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System >> Column >> Assembly >> Steering Column >> Lock Cylinder Housing

Lock Cylinder Housing

Fig 1: Lock Cylinder Housing & Screws
GC0042960Courtesy of CHRYSLER LLC
  1. Position the lock cylinder housing in the RUN position.
  2. Align the lock cylinder housing (2) with the steering column.
  3. Using Torx® Plus Bit, Special Tool 10041, or equivalent Tamper-Proof Torx® Plus (five point) 30 bit, install the two screws (1) fastening the lock cylinder housing (2) to the column. Tighten the screws to 16 N.m (142 in. lbs.).
scientia non olet · About LEMON Manuals