LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2008 >> Caliber R/T, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Ignition Control- Service Information >> Solenoid-Variable Valve Timing >> Removal >> Oil Control Valve Removal

Oil Control Valve Removal

Fig 1: Variable Valve Timing Solenoid
GC0053399Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Disconnect variable valve timing solenoid electrical connector.
  4. Remove variable valve timing solenoid mounting bolt.
    Fig 2: View Of Variable Valve Timing Solenoid Tab
    GC0053400Courtesy of CHRYSLER LLC
  5. Pull solenoid straight out of cylinder head.


Fig 1: Oil Pressure Sensor
GC0053396Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Rotate hose clamp out of way.
  4. Disconnect oil pressure sensor electrical connector.
  5. Remove oil pressure sensor.
  6. Disconnect variable valve timing solenoid electrical connector.
    Fig 2: Variable Valve Timing Solenoid Mounting Bolt
    GC0053397Courtesy of CHRYSLER LLC
  7. Remove variable valve timing solenoid mounting bolt.
    Fig 3: Solenoid Mounting Tab 1/1
    GC0053398Courtesy of CHRYSLER LLC
  8. Pull solenoid straight out of cylinder head.
scientia non olet · About LEMON Manuals