LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Nitro SLT, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Sensor-Engine Coolant Temperature >> Installation >> Installation-3.7L Engine

Installation-3.7L Engine

Fig 1: Removing/Installing MAP Sensor/ECT Sensor
GC0006589Courtesy of CHRYSLER LLC
1 - MOUNTING SCREWS
2 - MAP SENSOR
3 - ECT SENSOR
4 - FRONT OF INTAKE MANIFOLD
  1. Apply thread sealant to sensor threads.
  2. Install sensor to engine.
  3. Tighten coolant temperature sensor to 11 N.m (8 ft. lbs.) torque.
  4. Replace any lost engine coolant.
scientia non olet · About LEMON Manuals