LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Nitro SLT, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Stabilizer Bar >> Installation >> Stabilizer Bar

Stabilizer Bar

Fig 1: Stabilizer Bar Bracket
GC0061165Courtesy of CHRYSLER LLC
  1. Install the stabilizer bar (1) to the vehicle.
  2. Install the stabilizer bar bushing brackets (3). Tighten the nuts (2) to 149 N.m (110 ft.lbs.).
    Fig 2: Stabilizer Bar
    GC0061161Courtesy of CHRYSLER LLC
  3. Install the stabilizer link (1) bolts and bushings at the stabilizer bar. Tighten the bolt to 115 N.m (85 ft.lbs.) with full vehicle weight. 
  4. Install the tire and wheel assembly. Refer to STANDARD PROCEDURE .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals