Air Bag Restraint System: CLOCKSPRING: Installation

1. Install the clockspring on the column.
2. Connect the 4-way and 6-way connectors between the clockspring and the instrument panel wiring harness.
3. Install the steering column shrouds and connect traction control wire connector (if equipped). Refer to COLUMN .
4. Install the steering wheel. Refer to COLUMN .
5. Connect the 4-way harness connector to the speed control/horn harness to the clockspring.
6. Connect the 2-way connector to the remote radio control harness (if equipped).
7. Install the driver airbag. Refer to AIR BAG, DRIVER  Torque the two screws to 10 N.m (90 in. lbs.).

Do not connect the battery negative cable. See STANDARD PROCEDURE . Personal injury or death may result if the system test is not performed first.