LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Durango 3.7 K >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Pump >> Hoses >> Installation >> Pressure Hose

Pressure Hose

Fig 1: Identifying Steering System Components
GC0010485Courtesy of CHRYSLER LLC
  1. Install the pressure hose (3) to the vehicle.
  2. Reconnect the pressure hose (3) at the pump (1). Tighten the hose to 37 N.m (27 ft. lbs.).
  3. Reconnect the return hose (4) to the gear (2). Tighten the hose to 65 N.m (48 ft. lbs.).
  4. Reconnect the pressure hose (3) at the gear (2). Tighten the hose to 37 N.m (27 ft. lbs.).
  5. Connect the pressure hose (3) to the crossmember retainer.
  6. Remove the support and lower the vehicle.
  7. Refill the power steering system. See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals