LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber SXT, 1.8 C >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Capacitor-Ignition Coil >> Installation

Capacitor-Ignition Coil: Installation

Fig 1: CAPACITOR LOCATION
GC0053390Courtesy of CHRYSLER LLC
  1. Install coil capacitor (with connector facing rearward) and mounting bolt and tighten to 10 N.m (88.5 in. lbs.).
  2. Connect the electrical connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals