LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber SXT, 1.8 C >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Fuse Block >> Installation

Fuse Block: Installation

Fig 1: Locating Fuse Block
GC0053878Courtesy of CHRYSLER LLC
WARNING: On vehicles equipped with airbags, refer to WARNING before attempting any steering column or instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.
  1. Install the new wire harness and fuse block into the vehicle.
  2. Position the fuse block onto the mounting bracket and push down until the mounting clips are fully seated.
  3. Install the front bumper fascia. Refer to REMOVAL .
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals