LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber R/T, FWD, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Solenoid-Variable Valve Timing >> Installation >> Rear Solenoid

Rear Solenoid

Fig 1: SOLENOID MOUNTING TAB 1/2
GC0053400Courtesy of CHRYSLER LLC
  1. Rear variable valve timing solenoid. Note mounting tab location is different between front and rear solenoids.
  2. Install solenoid into cylinder head.
  3. Install mounting bolt and tighten to 12 N.m (9 ft. lbs.).
  4. Connect electrical connector to Variable valve timing solenoid.
    Fig 2: SOLENOID LOCATION 1/2
    GC0053399Courtesy of CHRYSLER LLC
  5. Connect negative battery cable.
  6. Install engine cover.
scientia non olet · About LEMON Manuals