LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber R/T, FWD, Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Sensor-Camshaft Position >> Removal >> Sensor-Front Camshaft Position

Sensor-Front Camshaft Position

Fig 1: FRONT CAM SENSOR
GC0053379Courtesy of CHRYSLER LLC
  1. Remove the air cleaner hose to throttle body, disconnect the inlet air temperature sensor electrical connector.
  2. Disconnect negative battery cable.
  3. Disconnect electrical connector from camshaft position sensor.
  4. Remove camshaft position sensor mounting screws.
    Fig 2: CAM SENSOR
    GC0053380Courtesy of CHRYSLER LLC
  5. Remove sensor.
scientia non olet · About LEMON Manuals