LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber R/T, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Pump-Water >> Removal >> Gas Engine

Gas Engine

Fig 1: WATER PUMP - WORLD ENGINE
GC0053127Courtesy of CHRYSLER LLC
1 - WATER PUMP
2 - MOUNTING BOLT
3 - WATER INLET TUBE NUTS
4 - INLET WATER TUBE
  1. Remove the accessory drive belt. See REMOVAL .
  2. Raise vehicle. Refer to STANDARD PROCEDURE .
  3. Remove accessory drive belt splash shield.
  4. Drain cooling system. See STANDARD PROCEDURE .
  5. Remove screws attaching water pump pulley (1). Remove pulley (1).
  6. Remove water pump mounting bolts (2).
  7. Remove water pump (3).
scientia non olet · About LEMON Manuals