LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.8L Engine (Service Information)) >> Lubrication >> Sensor-Oil Temperature >> Installation

Sensor-Oil Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: OIL TEMPERATURE SENSOR
GC0057355Courtesy of CHRYSLER LLC
  1. If re-using the oil temperature sensor, coat the threads with Mopar® thread sealant.
  2. Install oil temperature sensor (1). Tighten to 8 N.m (71 in. lbs.).
  3. Connect electrical connector.
scientia non olet · About LEMON Manuals