LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2007 >> Caliber R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.8L Engine (Service Information)) >> Engine Block >> Damper-Vibration >> Installation

Engine Block: Damper-Vibration: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: DAMPER REMOVAL
GC0057303Courtesy of CHRYSLER LLC
  1. Install crankshaft damper.
  2. Apply clean engine oil crankshaft damper bolt threads and between bolt head and washer. Tighten bolt to 210 N.m (155 ft. lbs.).
  3. Install accessory drive belts. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals