Manifold Flow Valve: Installation

Fig 1: SHAFT SLOT FLOW MANAGEMENT

Courtesy of CHRYSLER LLC

Make sure that slot in shaft is not damaged.

Fig 2: FLOW MANAGEMENT VALVE SHAFT
Courtesy of CHRYSLER LLC
Make sure that tab in valve is not damaged.

Fig 3: FLOW VALVE SHAFT & MOUNT
Courtesy of CHRYSLER LLC
Align tab in valve with slot in intake manifold shaft (2) and rotate valve counterclock wise until valve drops onto location pin mounting (1).
Install mounting screws and tighten to 6 N.m (53 in.lbs.).

Fig 4: ELECTRICAL CONNECTOR
Courtesy of CHRYSLER LLC
Connect electrical connector.
Install air tube.
Connect negative battery cable.