LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> Engine Block Heater >> Installation

Engine Block Heater: Installation

  1. Screw the block heater into the core hole. See Figure.
  2. Route the heater wiring harness away from and interference and secure with wiring tie straps.
  3. Refill the cooling system.
  4. Connect the negative battery cable.
  5. Start the engine and inspect for leaks.
scientia non olet · About LEMON Manuals