LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Boost Pressure Sensor >> Removal

Boost Pressure Sensor: Removal

  1. Disconnect the negative battery cable.
  2. Unplug the electrical connector.
  3. Remove the sensor retaining bolts, remove the sensor and O-ring. See Fig 1.
Fig 1: BOOST PRESSURE AND INLET AIR TEMPERATURE SENSORS
GC0037162Courtesy of DAIMLERCHRYSLER CORP.
1 - CHARGE AIR DUCT
2 - INTAKE AIR TEMPERATURE SENSOR
3 - BOOST PRESSURE SENSOR
scientia non olet · About LEMON Manuals