LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Durango 5.7 2, 4WD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Sensor-Oxygen >> Installation

Fuel Injection: Sensor-Oxygen: Installation

Threads of new oxygen sensors are factory coated with anti-seize compound to aid in removal. DO NOT add any additional anti-seize compound to threads of a new oxygen sensor. 

  1. Install O2S sensor and tighten to 22 ft. lbs. (30 N.m) torque.
  2. Connect O2S sensor wire connector.
  3. Lower vehicle.
scientia non olet · About LEMON Manuals