Sensor-Output Speed: Removal

Fig 1: Locating Input Speed, Output Speed and Transmission Range Sensors

Courtesy of DAIMLERCHRYSLER CORP.

1 - INPUT SPEED SENSOR

2 - OUTPUT SPEED SENSOR

3 - TRANSMISSION RANGE SENSOR

Raise vehicle.
Place a suitable fluid catch pan under the transmission.
Remove the wiring connector from the output speed sensor (2). See Fig 1.
NOTE: The speed sensor bolt has a sealing patch applied from the factory. Be sure to reuse the same bolt.
Remove the bolt holding the output speed sensor to the transmission case.
Remove the output speed sensor (2) from the transmission case.