LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2006 >> Durango 3.7 K, 42RLE/VLP >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Ignition Control) >> Push-Button Starter Switch >> Removal

Push-Button Starter Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Two screws are used to retain the push-button starter switch (Fig 1) to the back of the instrument panel.

Fig 1: Identifying Push-Button Starter
G03564064Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove plastic panel below push-button switch
  2. Remove electrical connector from back of switch.
  3. Remove two switch retaining screws.
  4. Remove switch from instrument panel.
scientia non olet · About LEMON Manuals